Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   MCOR / Pedal Assembly Confusion Explained (https://www.buggiesgonewild.com/showthread.php?t=97696)

expoman55 02-02-2022 08:41 AM

Re: MCOR / Pedal Assembly Confusion Explained
 
Thank you MyCart84 .. btw most impressive looking cart you have..

MYCART8A4RE 02-02-2022 11:32 AM

Re: MCOR / Pedal Assembly Confusion Explained
 
Anytime, and I appreciate that! Hopefully it's just your Mcor, it's a relatively easy swap out if you haven't done one already. There are a few YT vids on the procedure. Keep us posted

GeeSnow 02-04-2022 12:51 PM

Re: MCOR / Pedal Assembly Confusion Explained
 
Hello all. Can anyone tell me how the bar is supposed to attach to the other end? I removed the MCOR, amd the bar slid. I didn't notice how it attached. TIA.

Chemko 02-21-2022 07:32 PM

Re: MCOR / Pedal Assembly Confusion Explained
 
I have a 99 DS with pot box, I was told it was bad so I purchased the 293201 kit
And I plugged it in first to test it before I installed it and it only spins the rear tires slowly however sometimes while playing with pedal it spins real fast. I checked all connections and they seem fine. Any Ideas

Chemko 02-21-2022 07:33 PM

Re: MCOR / Pedal Assembly Confusion Explained
 
The instructions show how it fits.
Did you not get them?

djknightr 05-16-2022 08:31 PM

Re: MCOR / Pedal Assembly Confusion Explained
 
Ok I just finished reading all 18 pages and I still seem to be somewhat confused. I have an 08 Precedent with pedal group 1, but no packing brake left and some sticky pedals and am looking at possibly just upgrading to a pedal group 2 to take care of all the little issues at once. Can I use my MCOR2 with the new group 2 pedal setup? Would I need any conversion kit to do it? I keep seeing conflicting info.
From page 1
Generation 2 Pedal Assembly - Can be used with MCOR2, MCOR3, or MCOR4. If you currently have an MCOR2 that needs to be replaced, you have the option of replacing it with another MCOR2 or ordering the MCOR4 conversion kit. Either way works.
And from revolution carts site
This pedal assembly is a direct fit for ANY YEAR Club Car Precedent. If you have a Gen 1 pedal assembly, this is a direct replacement. Buyers with a Gen1 pedal assembly must also purchase the AM293001 - MCOR4 conversion kit from our store. The MCOR2 that is on your existing pedal assembly will not fit on the Gen 2 assembly.
Thanks

RegCamps 05-17-2022 07:22 PM

Re: MCOR / Pedal Assembly Confusion Explained
 
What are the options for a 1995 that has modle number starting with a9515? AM293201 says it has to be a9517 or higher.

Tom47 05-18-2022 06:14 PM

Re: MCOR / Pedal Assembly Confusion Explained
 
Quote:

Originally Posted by RegCamps (Post 1889914)
What are the options for a 1995 that has modle number starting with a9515? AM293201 says it has to be a9517 or higher.

Contact David Hicks,https://www.buggiesgonewild.com/ads/...1531684222.jpg for options that may be available. You may need to go to an electronic foot pedal which is available from Scotty B, https://www.buggiesgonewild.com/ads/...1357642551.png


All times are GMT -5. The time now is 11:47 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.