48v light wiring diagrams
 

With the help of a guy I met over the internet, I(mostly he) have made a couple good diagrams for wiring up regular 12v lights in a series to a 48v battery pack. first one shows all lights wired in a series(4 x 12 = 48 ). problem is that if one goes out, they all do. Battery pack sees an even load at all batteries.

http://img212.imageshack.us/img212/7...series1fq1.jpg

The other one shows them wired in 2 banks of 24volts((12+12=24)x2) these are wired through a double pole single throw switch. one that would have 4 terminals on the back. The good thing about this one is that if one light goes out it only takes out the other light wired with it. you will still have the other 2 to get you back to camp or whatever. That is taking for granted that you wire one head and one tail light per side. A bit more wiring but a whole lot cheaper than a reducer. The battery pack will see 48 volts under normal usage. Theis will also have an even load on the batteries.

http://img260.imageshack.us/img260/1...series2du6.jpg

You will still need to use fuses!!!

I hope this helps a lot of you out as this seems to get asked a lot!!

-Aaron

Re: 48v light wiring diagrams
 

Nice diagrams. That works.

Re: 48v light wiring diagrams
 

hey gents, im bones.i seen scotty b has got a melex. ive got a melex aswell. scored it from my ol ladies grandma. its an all original lemen and the axle sqeeks. were thinkin bout puttin her down!
uncle ed n whip r my speed golf partners-always returninng smiles u kn? my intentions r 2 pimp out this old cushman electric 4wh. i think ive got a good grasp on what has 2 happen 4 the cart 2 haul a** and im fortunate enough 2 have some tools and materials provided via work.
im open 2 any suggestions. my plan was 2 go w/ 48vdc 8v by 6. 2awg cable to power a d380 5hp-monster box controller.finally 2 the pumpkin we 8:1 appose 2 12:1. should work____maybe

ill leave u w/ this
'the man who does not lie 2 his woman has very little consideration 2 her feelings'