Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=15)
-   -   87 Marathon 2 stroke parts (https://www.buggiesgonewild.com/showthread.php?t=105469)

patfrank 04-30-2015 08:51 AM

87 Marathon 2 stroke parts
 
I am looking for new and used parts for my 87 Marathon, any suggestions? Right now I need a jet kit for the carb....Thanks, P

cart around 04-30-2015 09:58 AM

Re: 87 Marathon 2 stroke parts
 
http://www.golfcartking.com/EZGO-Car...18a(17563).htm

The only rebuild kit that I saw was for the 4 strokes.

TheGDFP 04-30-2015 10:02 AM

Re: 87 Marathon 2 stroke parts
 
I haven't run across a jet kit for them. A set of number drills will help ID what size they are, if not marked. I'm almost certain that our old 2-strokes are jetted for pre-oxygenated fuels, and would run a lot better with 5-10% richer jetting.

patfrank 04-30-2015 04:02 PM

Re: 87 Marathon 2 stroke parts
 
1 Attachment(s)
Thanks for the quick replies. As you can see I am missing the Pilot jet, look at end of filler rod...Anyone have a used one?

TheGDFP 04-30-2015 04:47 PM

Re: 87 Marathon 2 stroke parts
 
https://www.discountcartpartsstore.c...Parts/9505.htm

Morgan44 04-30-2015 05:44 PM

Re: 87 Marathon 2 stroke parts
 
I have some used parts from my 88 in the for sale section. Not sure what all you need, just throwing that out there.

patfrank 05-11-2015 08:51 AM

Re: 87 Marathon 2 stroke parts
 
Quote:

Originally Posted by Morgan44 (Post 1148794)
I have some used parts from my 88 in the for sale section. Not sure what all you need, just throwing that out there.

I need the pilot jet off the carb right now to make sure this thing runs before I continue....Thanks, P

cart around 05-11-2015 09:10 AM

Re: 87 Marathon 2 stroke parts
 
So many guys have replaced their carbs after trying to clean the old ones. There should be a bunch of members with old ones sitting around. I know there is another member looking for jets after drilling his out.

It's going to take the right people to see this.


All times are GMT -5. The time now is 07:07 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.