new axle and motor no bolts etc
So my new axle came in today, but I don't have the motor mounting bolts anyone know the size i need.
Also is there anything else that needs to go on the shaft when putting in the new motor? picture http://i34.photobucket.com/albums/d1...425_105423.jpg |
Re: new axle and motor no bolts etc
You shouldn't need anything other than motor mounting bolts. That looks like a 10 spline CC rear, so any 10 spline CC motor should work. As for the size/length of the bolts, I'm not sure, someone who knows will come along shortly... :thumbup:
|
Re: new axle and motor no bolts etc
I have a D&D motor to put in it. i also have a none working ez-go 94. i'm going to pull one of the bolts on it and see if it fits. If so i'll take it and find some new ones. I haven't tested this ex-go yet it might work so i don't want to rob stuff off of it yet :).
|
Re: new axle and motor no bolts etc
The manuals I have show those bolts being 1/4-20 x 2-1/4".
I am not sure if you need the "bumper" bushing that goes inside the motor shaft that couples to the differential... |
All times are GMT -5. The time now is 02:51 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.