Re: Yamaha G8 Club - Please post!
 

You'd need both of them to come close to a good start!!

Re: Yamaha G8 Club - Please post!
 

https://blacksburg.craigslist.org/sn...300838750.html

I'd go look at it, but I don't really need another cart...unless someone wants it for 2K

Re: Yamaha G8 Club - Please post!
 

Not true buddy...you wouldn't leave it stock anyway:mrgreen: Wish you guy's were closer....I'd help build an ATV killer:thumbup:

Re: Yamaha G8 Club - Please post!
 

Come on to the right coast


Sent from my iPhone using Tapatalk

Re: Yamaha G8 Club - Please post!
 

Thanks to smallblock450 i finally got my brake pedal fixed. I let my buddy do it so i gotta go pick it up tomorrow byt he says it is definitely faster now.... even though i would pull the pedal back up with my foot, maybe the brake was still sticking on some?

Re: Yamaha G8 Club - Please post!
 

Block is the man !


Sent from my iPhone using Tapatalk

Re: Yamaha G8 Club - Please post!
 

:lhmo: Even a Block Head can help sometimes:mrgreen:

Re: Yamaha G8 Club - Please post!
 

Bump:thumbup:

Re: Yamaha G8 Club - Please post!
 

Dave why would you bump this? Oh that's right G8's need a bump push to get going.:lhmo::lhmo:

Re: Yamaha G8 Club - Please post!
 

Bit the bullet and bought the g8 performance kit from Plowman. Along with dons custom “team” drive clutch. Does that clutch bolt get torqued to 45 ft lbs? I can’t fit an impact in there to apply that torque. I need to use a socket and ratchet. Do I take the clutch cover off and wedge a pry bar in there to hold back when applying the torque? I don’t want to damage the new clutch or anything else. Still need to do some fine tuning. Getting a lot of heat and smoke coming from the surface of the new muffler. Hope that will burn off and is just from being new. Excited to get her dialed in and see what she can do now!