Re: Yamaha G8 Club - Please post!
No 16 for me, that was a used to have cart. One I wish I'd kept.
|
Re: Yamaha G8 Club - Please post!
Quote:
http://i535.photobucket.com/albums/e...s/IMAG0123.jpg http://i535.photobucket.com/albums/e...s/IMAG0124.jpg |
Re: Yamaha G8 Club - Please post!
1 Attachment(s)
Man, you and Caj. If I were in either one of your "shops"!! I'd never get anything done!!:roll::thumbup::lhmo:
|
Re: Yamaha G8 Club - Please post!
LMAo Mike I'm glad you enjoyed some Blue Bell. The northern guys don't know what they are missing :thumbup:
Wow Scot cool looking office and your right Mike that is why I don't get anything done :mrgreen: |
Re: Yamaha G8 Club - Please post!
Mike is that a dust mop in the bottom right corner of the pic?
|
Re: Yamaha G8 Club - Please post!
|
Re: Yamaha G8 Club - Please post!
Quote:
X-rays show the left knee is 'bone-on-bone' ... nothing to lubricate or smooth out the joint so the bones have been wearing on each other ... like running an engine without oil for several years. Doctor didn't believe the first set of X-rays so he sent me back for a couple more -- said he'd never seen a joint in such bad shape. Truth is - I've started parking my cart just outside my door to take me to the mailbox or wherever else I need to go. And I have to load up on ibuprofen and Aleve before going to my welding class -- and I still pay for it the next day. Now I have to try to wait until Fall -- when my wife's insurance will cover 90% as opposed to the 75% now - a difference of about $5-$6K. Or wait until the VA can fit me in --- which would be no sooner than about 1.5 years! The VA is really pretty good ... but they just don't have the finances to get as many surgeons on staff as they need. :thumbdown: Anyway, it gives me an "excuse" to ride my carts ... but I wish it didn't hurt so much to stand around and work on them. There's only so much you can do while sitting down or using one hand to hold a cane. :thumbdown: |
Re: Yamaha G8 Club - Please post!
ess how do you make the pictures big like that?
|
Re: Yamaha G8 Club - Please post!
Quote:
|
Re: Yamaha G8 Club - Please post!
Quote:
Quote:
|
Re: Yamaha G8 Club - Please post!
Thats fancy talk to me Ess.:tard:
|
Re: Yamaha G8 Club - Please post!
Quote:
Translation: He just said "It's GEEK MAGIC". :lol: |
Re: Yamaha G8 Club - Please post!
2 Attachment(s)
well i dont know if this will work
|
Re: Yamaha G8 Club - Please post!
1 Attachment(s)
Sorry G1, URL = web address. Copy the web address from the top of the page and then use the insert image (see pic) right click and paste the web address in the window and select "ok".
|
Re: Yamaha G8 Club - Please post!
Quote:
|
Re: Yamaha G8 Club - Please post!
I know what he meant
http://www.buggiesgonewild.com/attac...t-sdc10257.jpg |
Re: Yamaha G8 Club - Please post!
I new i shouldnt have been trying to do this on the G8 thread.:tard::rabbit:. How the he!! do you do that. I must be retarded.
|
Re: Yamaha G8 Club - Please post!
|
Re: Yamaha G8 Club - Please post!
|
Re: Yamaha G8 Club - Please post!
Quote:
|
Re: Yamaha G8 Club - Please post!
1 Attachment(s)
Looks like you have just anough room for one more car.....Maybe a G8?:mrgreen:8)
|
Re: Yamaha G8 Club - Please post!
Quote:
|
Re: Yamaha G8 Club - Please post!
|
Re: Yamaha G8 Club - Please post!
lol ok so what was sooo hard about that :lhmo::lhmo:
|
Re: Yamaha G8 Club - Please post!
3 Attachment(s)
Attachment 65895
Attachment 65896No, the black dog is Pledge!! The mop, is Chester, and my golf cart, Spot, just AFTER a pledge!!:shock::mrgreen: But even I get mixed up some times!!:roll: Troub,In the 80's thats what they told everybody, but they've improved so much since then, they don't do that anymore! Now they ask, "why did you stay away so long?"! Well, I did a quick polish job on the case, it was so rough on the outside, and I didn't have the proper sanding materials to prepare the surface, so I got what I got. But its pretty good! I only polished the surfaces that were visable to the rear, so the rest of the case can shed heat properly. We'll see if I learned to assemble it correctly! Hope I don't do a Caj!! It's a little more shinny than the pictures show, its got oil all over it from handling the gears first. Put all new seals in it and plugged the hole where the gov. shaft came through. Well then you get something that looks like this!!:oops::roll: Good lookin post, huh?!:shock: |
Re: Yamaha G8 Club - Please post!
Geez Mike I wish I had you patience and attention to detail..... Looks good :thumbup:
|
Re: Yamaha G8 Club - Please post!
Awesome job Mike! Wow!
|
Re: Yamaha G8 Club - Please post!
Great job Mike.:thumbup: Have you gotten your clutch back together?
|
Re: Yamaha G8 Club - Please post!
Sweet ! Buy one Get one Free at Fridays
http://www.buggiesgonewild.com/attac...t-imag0660.jpg |
Re: Yamaha G8 Club - Please post!
Don't Curti, now everybody sees how bad a job it is!!:lhmo::lhmo: This is one of those 6' jobs!:oops:
And no Tom, went to see a job last night, and after I was clean, didn't want to go out and get dirty again. probably today! And Thanks Jimmy!! I think it will look good enough in the car! I did this in about 2 1/2 hr's. |
Re: Yamaha G8 Club - Please post!
Once again Mike, nice job:thumbup: Altough, you should have polished the bottom side too...."the rodants you run over might want to see themselves in the mirror":lol:
|
Re: Yamaha G8 Club - Please post!
Mike can i get that coupon from you? The TGI Fridays one for the free drink.
|
Re: Yamaha G8 Club - Please post!
Wouldn't it be easier to make up your own coupon? Maybe "Buy one get 6 free!":lol:
Even better ... HEY Tommy! I want to redeem my coupon for a FREE G9 (+ shipping!) from you. Just a minute -- I've got to wait for the ink to dry. I'll send you the coupon as soon as the fully restored cart with the clone engine arrives. The coupon will say .... errrrrr .. SAYS (yeah, that's it) delivery is guaranteed within 3 weeks. :lol: :mrgreen: And you have to honor it because it's a REAL coupon ... just coming off the printer right now! :thumbup: O-Mike ... just wait until you see the coupon I've got from YOU!!! :wink: The one from Smallblock will have to wait until I hear he's got the bike engine cart finished! :-P NOTE: I DON'T give out coupons so don't try to mess with ME!! :roll: |
Re: Yamaha G8 Club - Please post!
1 Attachment(s)
After teasing its pray the G9 will lunge out and attack its pray, the snow bunny like animal G8.:lhmo: This is the only known picture that’s been taken by a G8 owner before his cart is devoured by the awesome power of the G9.:lhmo::lhmo:
|
Re: Yamaha G8 Club - Please post!
Just like a G9, leaking oil all over the floor
http://www.buggiesgonewild.com/attac...t-sdc10295.jpg |
Re: Yamaha G8 Club - Please post!
One spot of oil and you think its from my cart. I think not. That cart dosent leak a drop of oil. Stop making my pictures big just because i dont know how to do that. Come on dont tell me that dosent look mean. Can you tell what part i forgot to paint from that pic?
|
Re: Yamaha G8 Club - Please post!
ok, So its not an oil leak, just the way a G9 marks it's territory :wink::toothy2:
|
Re: Yamaha G8 Club - Please post!
Ok, thats a good way to look at it. The clone engine in that cart will leave black marks on the pavement.:thumbup: Im doing another one right now and i dont remember it taking me this long to do. I keep asking myself how did i do this and how did i do that. The build is going to come to a hault here soon with baseball season starting.
|
Re: Yamaha G8 Club - Please post!
Quote:
|
Re: Yamaha G8 Club - Please post!
2 Attachment(s)
Sorry Tommy, but thats out of the tranny!! I've been inside one for 3 days! Its from the breather tube, Buddy! 8)
And reverse is not quite as strong as forward, for you high horse power guys, so be aware of that.:thumbup: Got Spot back together, and forward is forward and reverse is reverse!!:thumbup: So far!:shock: Smallblock, how do you put those concerige springs on when rear end is out of the car??? Man I had a fight on my hands, the dang thing is like 7" long!! Got to compress it and then turn it 110* and compress it summore! MAN!!:roll: I got it, but the way I did it was not safe! |
All times are GMT -5. The time now is 01:30 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.