Pulsar coil
Wondering what pulsar coil everyone using on the hei conversion
|
Re: Pulsar coil
The original pulsar is used. The ignitor is what gets replaced.
|
Re: Pulsar coil
OK this what I've got I bought someone's cobbled up mess trying to get it fixed right for the wife and kid to drive i did the he I conversion and someone already replaced pulsar I ohm it read 154 and just put new igniter and he coil as conversions states but can't get it to spark also see pics where the ignitor has a wire coming off of the mounting hole where does it go
|
Re: Pulsar coil
|
Re: Pulsar coil
that wire goes to a good ground, it grounds the hei metal plate,which should be mounted on metal, preferbly aluminum for a heatsink.
|
Re: Pulsar coil
OK I've just got mine mounted to the frame is that OK ?
|
Re: Pulsar coil
well you can leave it , but when you get it running, check the hei and see if its getting hot, if hot to touch ,remount to a aluminum bar for better cooling.
|
All times are GMT -5. The time now is 04:19 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.