Sled Throttle Linkage
Anyone know if someone makes a kit that can use the stock gas pedal in an '84 Marathon but make it into a pull cable. The stock setup pushes the cable, I have a sled motor in mine and I am trying to get the throttle linkage worked out. When I push the pedal i need it to pull the throttle cable. The Stock cable is actually the exact length, width & everything it just doesnt move the correct direction.
|
Re: Sled Throttle Linkage
Pics... We need pics.:thumbup:
|
Re: Sled Throttle Linkage
Quote:
|
Re: Sled Throttle Linkage
I will get pics in the morning. Basically though, when you push the gas pedal the throttle cable pushes outward. The stock EZGO setup was funky.
I need a gas pedal setup just like a motor cycle.. ie.. when you push the pedal or in my example "twist" the throttle the cable pulls the carb open. |
Re: Sled Throttle Linkage
got it, take a picture of the linkage were the cable mounts to the petal Assembly.:thumbup:
|
Re: Sled Throttle Linkage
Quote:
:worthless: |
Re: Sled Throttle Linkage
|
Re: Sled Throttle Linkage
:thumbup: Cool, Rigid cable. Can't ya put the linkage on the other side, Yes?
How 'bout a pic of the sled carb linkage? |
Re: Sled Throttle Linkage
that was fast, is the cable long enough to Mount it from the bottom? what does the carb look like.
|
Re: Sled Throttle Linkage
Quote:
|
All times are GMT -5. The time now is 09:08 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.