Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=15)
-   -   repowering an easy go 3 wheel x brace. (https://www.buggiesgonewild.com/showthread.php?t=98445)

Mfsbuell 09-01-2014 06:41 PM

repowering an easy go 3 wheel x brace.
 
Greetings all.
Mike here.
I have received a free early 70 s 2 stroke easy go. The engine is only good for parts, anyone want some?
Has anyone tried to repower one while adding the 2 speed transmission from a rototiller, giving one hi, low and reverse? Northern tool has a 212 cc electric start engine.
Thoughts, laughter, etc.?
Cheers
Mike

tdump 09-01-2014 07:05 PM

Re: repowering an easy go 3 wheel x brace.
 
I got a gas 1 last week to and it is 2 stroke. I have looked it over purty good and since the engine mount and all has to flex with the suspension, i dont see putting a standard transmission and regular engine in there and it working well.
I am fiquring on perhaps carefully removing the gas power train and putting it in the swap section and hope someone has a sparky or good power train for 1 to swap.
If there was a way to use a ujoint from the trans to the rear axle, a regular engine and such could be made to work I think but without tying up a lot of time I don't have trying to find out how the input to the axle works I don't know what is there.


All times are GMT -5. The time now is 02:31 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.