G2 comes out of gear
 

My G2 comes out of gear and goes right back in sometimes. What can I do to fix this? Do you adjust the cables behind the shifter and if so how much?

Thanks Mac

Re: G2 comes out of gear
 

Have someone work the shifter and watch the lever on the rear end. Make sure the lever is traveling all the way each direction. If not, adjust.

Re: G2 comes out of gear
 

Ron....you always have sound advise for members questions. There are "special" cable lubers, sometimes that helps. The 2 cables work "push/pull" one bad cable and it will not go into gear all the time. You can try "tightening" the adjustments (for better "throw"). Is the f/r lever really had to move? Sometimes you should just replace "both" cables. Let us know what happens....could help the next person. Good luck Dave

Re: G2 comes out of gear
 

Thanks for the replies. I thought I could adjust the cables, just wanted to here it from you guys. I already have adjusted some and it is better so I may move just a little more. Where do you get a cable luber and the new cables?

Thanks Mac

Re: G2 comes out of gear
 

Anyone ???????????????

Re: G2 comes out of gear
 

bump... Any recommendations on a cable lube?

Re: G2 comes out of gear
 

http://www.sportingforless.com/Cable-luber-p/t01.htm
$5-10 bucks on-line. $15 at your local M/C dealer.......

Re: G2 comes out of gear
 

Thanks for the information Flintrock. Do you know if it works well?

Thanks Mac

Re: G2 comes out of gear
 

I've used them before, I like to just softly hold the cable in a vice or upright and spray it every time I walk by. Let it soak to the other end, work the cable up and down each time and don't be in a hurry will get the best results.
Make sure you use a penetrating oil, WD-40 is not.

Re: G2 comes out of gear
 

Flintrock I went and bought the cable luber this morning and will try it out. It was $9.95 at my local motorcycle shop.


Thanks Mac