forward/reverse switch change to toggle switch
I have A 1987 club car 36 volt. can I change my forward/reverse lever to a toggle switch. If so how do I do it?
|
Re: forward/reverse switch change to toggle switch
You may be able to run a reversing contactor.
|
Re: forward/reverse switch change to toggle switch
what is a reversing contactor?
|
Re: forward/reverse switch change to toggle switch
This is an advanced modification. I know Roady89 has done it. I wouldn't suggest you try it without some pretty good electriconics background knowledge...
|
Re: forward/reverse switch change to toggle switch
You have to use a reversing contactor. Its not THAT advanced. You need a on/off/on rocker and the contactor. I used an EZGO PDS F/R rocker switch switch from MMT's.
Heres a controller version, you'll have to figure out the resistor cart. Its all in the F/R so its not much different |
Re: forward/reverse switch change to toggle switch
Bump because I am going to do this soon. Just gotta gather parts :mrgreen:
|
Re: forward/reverse switch change to toggle switch
That must be a healthy contactor.
|
Re: forward/reverse switch change to toggle switch
Chevy, I believe this is along the same lines that Rabbit did with his.
|
Re: forward/reverse switch change to toggle switch
Quote:
and a 101-LEV200H4ANA http://www.evsource.com/tls_kilovac.php I am still trying to figure this out. I get easily confused with understanding all these electrical terms. :| |
Re: forward/reverse switch change to toggle switch
Quote:
Thanks man |
All times are GMT -5. The time now is 08:55 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.