|
kf-82 valve train
does anyone know where to get the inserts for the valve tappets to adjust valve clearance?
|
Re: kf-82 valve train
Are you missing some parts or are you looking for some kind of tool? I have a KF82 motor in pieces in my basement, do you need something from it? When I rebuilt one of my KF82 motors after it threw a rod, I never messed with any of the valvetrain parts so I'm not sure what you are needing.
|
Re: kf-82 valve train
i might call things wrong but here is what i am looking for off of the cam there are 2 pieces that relay motion up to the valves (i think these are the tappets) in the end that pushes against the valve there is an insert i beleve this is for adjusting the valve lash i am missing both inserts
|
Re: kf-82 valve train
I think I know what you mean now, they're like little caps that have like a small stem section that goes down into the lifter. I'm 80% pretty sure I do have those. I'll check when I get home.
|
Re: kf-82 valve train
let me know i am just going to start emailing you you are the kf-82 parts guy:lhmo:
|
Re: kf-82 valve train
I have them. The two little caps in the foreground:
http://i148.photobucket.com/albums/s...rudda/null.jpg |
Re: kf-82 valve train
yes they are whatr do you want for them?
|
Re: kf-82 valve train
PM sent.
|
Re: kf-82 valve train
You get this thing running yet? :mrgreen:
|
Re: kf-82 valve train
BTW, there are dozens of different sizes. That's how you get proper valve clearance.....
|
| All times are GMT -5. The time now is 12:03 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.