H/D Forward/Reverse switch
2 Attachment(s)
Working on a 1999 Club Car DS Series drive. I have a H/D F/R switch but my 2ga. cable ends are to big to hook up to switch. It is a Red Hawk
FR-021. Is there another switch that I need to get. First time rebuilding a Series drive cart. |
Re: H/D Forward/Reverse switch
Talk to David at Revolution he got me straight
Sent from my iPhone using Tapatalk |
Re: H/D Forward/Reverse switch
For anyone reading this in the future what was the answer?
|
Re: H/D Forward/Reverse switch
Tin shears or dremel bit to trim the excess from the ends of the terminals.
|
Re: H/D Forward/Reverse switch
That's what I did....
|
Re: H/D Forward/Reverse switch
Thank you....
|
Re: H/D Forward/Reverse switch
Quote:
|
Re: H/D Forward/Reverse switch
Was able to get back on this project today. This is a 1999 CC DS 48 volt series drive with a D&D motor and MCOR4 conversion Alltrax 500 amp controller.
I got everything hook up one wheel off the ground. Test reverse good put in Forward still went in reverse but faster speed. I know I have something wired wrong but I am at a lost. :help: |
Re: H/D Forward/Reverse switch
David came through again. I had cables hook up wrong. His customer service is outstanding.
Sent from my iPhone using Tapatalk |
All times are GMT -5. The time now is 06:28 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.