Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas Yamaha (https://www.buggiesgonewild.com/forumdisplay.php?f=17)
-   -   Yamaha governor bypass (https://www.buggiesgonewild.com/showthread.php?t=877)

NO NO NO E-Z-GO! 08-04-2007 03:35 PM

Re: Yamaha governor bypass
 
You will probably have to put a little more cable towards the pedal with the adjustment end of the cable. I did this same mod today and had good results. I also put a jet and a K&N in the carb. It runs great but acts like it wants to bog when you get on it. Probably a fuel and air mixture problem.

cartin AK 08-04-2007 07:32 PM

Re: Yamaha governor bypass
 
I have no bog or hesitation, it will not go at slow speeds the switch will click. How do you make it key start? Same as the EZ-GO?

NO NO NO E-Z-GO! 08-04-2007 07:54 PM

Re: Yamaha governor bypass
 
Move the threaded end of the cable towards the front of the cart. If I remember correctly, they're 10mm nuts. I have no idea how to make an E-Z-GO key start. Even less on a Yamaha. I can do it on a Club Car, but that's it.

caddymankc 08-05-2007 10:29 AM

Re: Yamaha governor bypass
 
you might be able to just jump the micro switch for the pedal this should just let the engine running whenever the key is on but a better carts clutch might just engage right away?

NO NO NO E-Z-GO! 08-05-2007 10:30 AM

Re: Yamaha governor bypass
 
Ask that again in the form of a question. :-P

Yamaha clutches engage as soon as they're spun since they have no stall spring in them.

caddymankc 08-05-2007 11:11 AM

Re: Yamaha governor bypass
 
ok then my ezgo had a really worn clutch i would be able to hit the gas about 2 inches untill it started to move

shawn.m 08-21-2007 02:45 PM

Re: Yamaha governor bypass
 
a picture of the two cables connected together
http://usera.imagecave.com/sdmayhew/DSC07406.JPG

Punisher 08-26-2007 08:44 PM

Re: Yamaha governor bypass
 
I have just done this to my G9 and wow what a difference. Thanks a ton for the play by play with the pics, it was a big help!

blakehenry00 08-26-2007 10:02 PM

Re: Yamaha governor bypass
 
For the G16 to "idle" take out the pedal inspection cover and look behind the gas pedal. Flip the Micro upside down and the cart will "idle".

Yamaha4life 11-11-2007 12:13 PM

Re: Yamaha governor bypass
 
hmmmmm, i didnt have to do any of that on my g2 back when it was stock...

see the cable that hooks to the carb, its L shaped, just straighten the joint out and tighten the screw on it and wala, it bypasses it. then if you want it slow again just loosen the screw....


All times are GMT -5. The time now is 07:03 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.