Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=14)
-   -   Clutch lube? (https://www.buggiesgonewild.com/showthread.php?t=100353)

aggiefan 11-02-2014 08:59 AM

Clutch lube?
 
My clutch is not shifting correctly. It's taking extremely high RPM's and a long distance traveled before it begins to open. Is there there a way to lube it? If so how and what to use? Thanks

lockman1 11-02-2014 09:26 AM

Re: Clutch lube?
 
CC drive and driven clutches are designed to operate "dry" (no lubrication... anywhere!)
If the drive clutch pops out late, (higher RPM) it may be due to worn buttons and thrust washer!
The driven clutch may have a weak/broken spring, or a worn helix!

:wink:

aggiefan 11-02-2014 08:57 PM

Re: Clutch lube?
 
Thanks for reply lockman. Here's the long version of what's going on. Last year I sent both clutches to CCP to have the drive clutch rebuilt, torque spring installed in the driven and order the heavy duty drive belt. After receiving and installing them the cart began squeeling at various speeds. Sounded like a car with a loose fan belt. It also at times felt like the clutch was binding. Called CCP and he said he had never heard of the condition and didn't really offer any suggestions.

After running it and putting up the condition for several months it seemed to get better only squeeling ever now and then. Recently the squeeling and binding returned with a vengence. Finally cut the heavy duty belt off and replaced with a stock belt and squeeling is gone. New problem is now the clutch not shifting.

I understand the torque spring is supposed to require higher RPM's before moving but what I have going on is crazy. In maintenance mode the drive clutch is completely maxed and the motor is red lined before the driven clutch begins to open. Sorry so long. Any ideas?

lockman1 11-03-2014 06:39 AM

Re: Clutch lube?
 
Check the 3 driven clutch buttons (that the helix cam rides on) for wear or breakage, and maybe, go back to a stock driven clutch spring!
If that works better, but you lose just a little bit of torque, then try another severe duty belt with the stock spring,
that should bring a bit of torque back!

:wink:


All times are GMT -5. The time now is 04:12 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.