1996 EZGO 36 to 48v question
ScottyG set me up a while ago with a 36-48v conversion on my old Club Car. It was a great set up.
I have acquired a 1996 EZGO serial 973443 mfg K0396. This cart is missing its batteries and I figured I might as well upgrade to 48 volts. What all would I need to upgrade to make my cart 48v? What would the cost be minus batteries? Thanks for the help again |
Re: 1996 EZGO 36 to 48v question
ScottyB's package #4 is what I went with, Alltrax controller, solenoid, and heavy duty F&R switch. I'm in the process of upgrading the cables right now.
|
Re: 1996 EZGO 36 to 48v question
do you have a series or pds cart?
|
Re: 1996 EZGO 36 to 48v question
Quote:
No PDS carts in 1996... Club Car DS driver’s club #59 |
Re: 1996 EZGO 36 to 48v question
Serial no. indicates a DCS so if true this is a sepex cart not "series". Need to know for sure to suggest an upgrade path. Is there a run/tow switch?
|
Re: 1996 EZGO 36 to 48v question
Quote:
|
Re: 1996 EZGO 36 to 48v question
Quote:
where do you see his packages? |
Re: 1996 EZGO 36 to 48v question
http://www.cartsunlimited.net/alltrax-sr-series--.html
If you have a series cart. (it's actually Item #4 on this link) He also has info to tell which cart you have whether it be a series or sepex drive. |
Re: 1996 EZGO 36 to 48v question
All upgrades should start with the drive system ID here > http://www.cartsunlimited.net/upgrade-suggestions.html
|
Re: 1996 EZGO 36 to 48v question
Quote:
Thanks |
All times are GMT -5. The time now is 11:35 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.