New to me GXT804D , questions
1 Attachment(s)
Just picked up a gas 96 GXT804D with hydraulic dump bed. Price was too good to pass on. Has a couple small issues to iron out but before I do that I have to figure out why it has very little power. In neutral it sounds good, barring a little POP every now n then... No torq, takes forever to get going but when it get there it's decent.. I'm an electric GC person and I figured I'd post here to get pointed in the right direction..
I know, I know... This threads useless without pics.. |
Re: New to me GXT804D , questions
Try adjusting the valves, it is 4-stroke right?
|
Re: New to me GXT804D , questions
Yes it's got the robin 350 in it.... Stupid question before I try the valve adjust , do i need a replacement gasket or is the valve cover gasket reusable?
|
Re: New to me GXT804D , questions
It's reusable, it's like a big o ring in a groove in the cover.
|
Re: New to me GXT804D , questions
For your viewing pleasure:
http://www.buggiesgonewild.com/ezgo-...djustment.html and: http://www.buggiesgonewild.com/ezgo-...ntainance.html |
Re: New to me GXT804D , questions
Oh and this one:
http://www.buggiesgonewild.com/ezgo-...iagram-id.html |
Re: New to me GXT804D , questions
Thanks for the quick replies! I've got some things to do around the house before I head over to where it is.
Plan on some electrical troubleshooting also.. Anyone have a link to the elec. schematic of one of these? Will report back after I adjust the valves and check compression. |
All times are GMT -5. The time now is 11:59 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.