Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas Yamaha (https://www.buggiesgonewild.com/forumdisplay.php?f=17)
-   -   2003 G22 Compression Release???? (https://www.buggiesgonewild.com/showthread.php?t=98283)

brinkkl2000 08-28-2014 03:43 PM

2003 G22 Compression Release????
 
Hi guys, I have a 2003 G22 that died while riding it the other day. Can anyone verify that there is or is not a compression release on these things. It is showing about 50lbs compression. The spark is very weak too so I am thinking that is the problem... too... Any help would be great!

Dflowe 08-29-2014 07:04 AM

Re: 2003 G22 Compression Release????
 
They do not have a compression release. If your compression is at 50 PSI, it sounds like you have some other issue (burnt valve possibly) to deal with. A weak spark is another issue, but it could be as simple as a spark plug or possibly a igniter coil.

smallblock450sl 08-29-2014 09:01 AM

Re: 2003 G22 Compression Release????
 
Does your engine have a sticker that say's "JN6" or "JR7"? 2002's call for a JN6-12171-00-00 cam's, but 2003 to 2015 call for JR7-12170-00-00 cam's. Sorry, I don't have an awnser for this one. Time to pull the side case.

brinkkl2000 08-29-2014 12:01 PM

Re: 2003 G22 Compression Release????
 
Thanks for the responses guys. It is a JR6 engine. Is a burnt valve apparent from the top side? I guess a leak down test is in order. I did compare it to another exact model cart and it showed about 50 psi until I put the accelerator down all the way and then it shot up to 150. of course, I put mine all the way to the floor and was still 50lbs so that piece of info was irrelevant I guess...

craig tn 08-29-2014 06:45 PM

Re: 2003 G22 Compression Release????
 
Check governor shaft for cable movement while pressing the accelerator pedal.

cgtech 08-30-2014 10:35 PM

Re: 2003 G22 Compression Release????
 
Quote:

Originally Posted by craig tn (Post 1070106)
Check governor shaft for cable movement while pressing the accelerator pedal.

X2... Look inbetween the valve cover and the airbox, you can see the arm on top of the carb (it is plated, kinda gold looking). Is it moving when pedal is pressed?

Mike Mac 09-02-2014 07:44 AM

Re: 2003 G22 Compression Release????
 
What these guys are saying, is make sure throttle cable is not broken.

Then make sure push rod is has not slipped off lifter, so intake valve is not opening.

Mike Mac 09-02-2014 07:45 AM

Re: 2003 G22 Compression Release????
 
What these guys are saying, is make sure throttle cable is not broken.

Then make sure push rod has not slipped off lifter, so intake valve is not opening.

cgtech 09-02-2014 09:11 AM

Re: 2003 G22 Compression Release????
 
Although i dont think this is your problem, technically, the G22 does have a form of compression release. The camshaft has a weight and rod that holds the exhaust open when at very low (cranking) speeds.

brinkkl2000 09-02-2014 09:51 AM

Re: 2003 G22 Compression Release????
 
You guys rock!!!! It is the throttle cable. Pushed the pedal and the cable didn't move, actuated it by hand and she fired right up! Right in front of my eyes and I never seen it.


All times are GMT -5. The time now is 08:32 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.