G2 to g14 rear axle swap
Got hold of a g14 gas buggy with a bad rear end
His kids took it off road and smashed the pumpkin will a g2 rear end fit in a g14 with slight modifications? G14 has a dana |
Re: G2 to g14 rear axle swap
I'm sure there's a way to get it to fit. Can you post a pic of the two?
|
Re: G2 to g14 rear axle swap
Where are you located? I keep seeing this pile of parts show up near me
https://www.facebook.com/marketplace...6456898593484/ |
Re: G2 to g14 rear axle swap
The 95 G 14 used the G2 rear end where as the 96 G 14 used the Dana unit. Hopefully there were no or minimal changes in the mounting.
|
Re: G2 to g14 rear axle swap
The center section will work. The problem is the axles/ axle shafts from the the early G14 (more like the G8's) compared to the G2/G9's. Guess you won't know till you try to set the assembly onto the swing arm. Good luck:thumbup:
|
Re: G2 to g14 rear axle swap
Quote:
|
Re: G2 to g14 rear axle swap
Quote:
|
Re: G2 to g14 rear axle swap
I used the Steeleng G2 lift kit on my G14 so it must be pretty close for that to just bolt in with no mods. I kind of learned the hard way that the 95 G14 took the earlier parts and the 96 G14 used the later G16 type parts.
|
All times are GMT -5. The time now is 04:51 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.