High speed gears?
 

I had a question about installing some 6:1 gears in a 94 gas club car... im leaving the cart stock height and on stock size wheels. My friend and i have worked in a golf cart shop for several years. We have done just about everything you could imagine to a cart, including many high speed gears in electric club carts but never in any gas carts. For those who have done it, i was wondering if there are any special tools needed or if i will need to have any bearings pressed in or out? Also, about how hard is it on a scale from 1-10? thanks.....

Re: High speed gears?
 

Does your shop have service manuals you could refer to?
Have you googled any info on it or done any searching on the topic here?

Re: High speed gears?
 

Ive searched on here and could not find much....and the shop manual only has a lay out of what the rear end looks like inside, and from what i can tell there are plenty of gears in there!

Re: High speed gears?
 

On that '94 the internals of the differential should be the same as the electric models.. The gas models just have a F/R transmission that bolts on in place of the electric motor.. Just unbolt the transmission and remove it like you would an electric motor.. For that vintage, the gas & electric axles use the same Hi-Speed gearsets.. If you've done a set on an electric CC, the gasser is no different once you unbolt the transmission and slide it from the input shaft splines...

Re: High speed gears?
 

ok cool.... thanks,

Re: High speed gears?
 

:worthless:
We love Pictures and it may help the next guy,
sendem if U Havem :thumbup: