Re: Bombardier NEV owner exchange
3 Attachment(s)
Here are some pics of how I mounted the engine. I mounted a 150cc Kayo 3 speed semi-automatic. Its mounted where the battery tray was located. I mounted a back piece to the back battery tray mounts and the front to the tunnel mounts. I welded on two bullet hinges to connect the frame. Hopefully the pics make sense.
|
Re: Bombardier NEV owner exchange
Looks great! Got any finished pics? and how is the power in the 150cc?
|
Re: Bombardier NEV owner exchange
Quote:
|
Re: Bombardier NEV owner exchange
Thanks dingdangit!
I called peacock with that number and they don't list that part number. I have read this forum twice (at least) and did not know of a parts manual. I have the PDF of the shop manual from this site and page 3-1-9 is a troubleshooting for electrical but I don't see the part numbers there. Is the parts manual the same as a shop manual? Also, I added additional pics to my profile on what I did in my conversion. Still working out issues but does run. I need to figure out the speed sensor issue as the electrics won't stay on. |
Re: Bombardier NEV owner exchange
I found a Master Cylinder for $23.79 at Rock Auto.
https://www.rockauto.com/en/moreinfo...t=1836&jsn=263 It's originally for a 1968-1982 FIAT 124. I also ordered a cylinder repair kit for a 1984-1985 NISSAN 200SX for $1.56 each. I couldn't find the correct wheel cylinder or the shoes, so I will have to buy the ones from nevaccesories.com if the repair kit doesn't work. |
Re: Bombardier NEV owner exchange
Quote:
Henk |
Re: Bombardier NEV owner exchange
Hello,
I hope all is well. I am getting an Error Code 3,1 (Pre-Charge Fault), the cluster indicator blinks 3 times, pauses, then blinks 3 times again. The cluster was replaced a few years ago, I recently replace the Solenoid Contractor and the pre-charge resistor, but still, get the Error Code 3,1. I recently shipped my Curtis Controller 1509-1212 in for testing and diagnostics to FSIP (Flight Systems Industrial Products), they are a Curtis Partner Authorized Service Center. I hope I don't need a replacement controller. Has anybody experienced this issue and how did you resolve it? Thanks |
Re: Bombardier NEV owner exchange
Quote:
See post 254 for cylinders |
Re: Bombardier NEV owner exchange
this is the place that rebuilds controllers http://fsip.biz/
|
Re: Bombardier NEV owner exchange
It’s a shame this link has gone silent.
|
All times are GMT -5. The time now is 01:03 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.