Oil Pump for 1988 EZGO
Anyone know where I can get a replacement oil pump for my 1988 EZGO Marathon? Mine works, but the tang that fits into the end of the crank has some wear and I want to replace it.
Getting ready to order the engine rebuild kit. Ordering my parts from Baker Cart Supply. Thanks much, Dave |
Re: Oil Pump for 1988 EZGO
if you want to make sure it ALWAYS works then i would bypass
the pump and mix my own (that way you always know it's getting oil) just my 2 cents, Dew :thumbup: |
Re: Oil Pump for 1988 EZGO
Yep, I realize that was my only reasonable option and I think that is what I will do.
I remember reading somewhere in here about 1 ounce of oil per gallon, right? Thanks Dew. Dave |
Re: Oil Pump for 1988 EZGO
YA, 1 oz. to 1 gal.
if you run it hard i would go 1 1/2" to 1 gal.:thumbup: later, Dew |
Re: Oil Pump for 1988 EZGO
Oh sorry; 1 1/2 oz (not an inch and a half.) lol
|
Re: Oil Pump for 1988 EZGO
Thank you for everyone's help, I appreciate it.
We are going to ****-can our oil pump and mix 6 oz. of oil to a 5 gal. can to start with after we rebuild the motor and give it fresh paint (ground up resto). One question about my fuel filter. Do I need to be concerned about the fuel filter being a certain kind now that I will be mixing my gas? Thanks for any help, Dave |
All times are GMT -5. The time now is 05:21 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.