Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Yamaha (https://www.buggiesgonewild.com/forumdisplay.php?f=18)
-   -   Mounting bolt size for throttle position sensor? (https://www.buggiesgonewild.com/showthread.php?t=179901)

meyre1 10-04-2021 07:50 PM
Mounting bolt size for throttle position sensor?
 
I purchased a 2012 Yamaha g29 cart that was missing the throttle position sensor and mounting bolts. Any one know the size of the 2 bolts?

JPonLKN 10-04-2021 09:00 PM
Re: Mounting bolt size for throttle position sensor?
 
It is a 7mm head, but not sure of the thread pitch

ojo 10-05-2021 04:57 AM
Re: Mounting bolt size for throttle position sensor?
 
Must be metric...

Volt_Ampere 10-05-2021 08:36 AM
Re: Mounting bolt size for throttle position sensor?
 
My G29 has a mix of english and metric but I would guess that part would be metric.

ojo 10-05-2021 08:46 AM
Re: Mounting bolt size for throttle position sensor?
 
I've had that screws out, could be ~ M5 x 20 without guaranty :wink:

JPonLKN 10-06-2021 09:15 AM
Re: Mounting bolt size for throttle position sensor?
 
It is a 7mm head, and is a M4x0.7 thread. Just verified it with my tap and die set. 0.7 thread gauge fits, and the M4x0.7 tap threads in the hole.

ojo 10-06-2021 09:40 AM
Re: Mounting bolt size for throttle position sensor?
 
Ok, sorry for my bad memory...

meyre1 10-06-2021 09:12 PM
Re: Mounting bolt size for throttle position sensor?
 
Thanks for all the help.


All times are GMT -5. The time now is 07:47 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.