94 G9A Ignition Coil Ground
With the help of a service manual I figured out where the ignition coil is mounted and found the two wire that attach to it but I canted figure out where the ground wire attaches. Please help
|
Re: 94 G9A Ignition Coil Ground
Ground is atrtached to the body via one of the bolts that holds the coil.
|
Re: 94 G9A Ignition Coil Ground
The plastic casing that covers the engine has 2 raised screw mounts on the front that are the exact spacing to moun the coil. Just below that is a bolt going thru the plastic that I think is actually going into the engine casing. would this be for the ground? Nothing else is attached to this bolt.
|
Re: 94 G9A Ignition Coil Ground
Correct. Ground it by going back to the negative battery terminal or A1 of the starter gen..
|
Re: 94 G9A Ignition Coil Ground
What is A1 on the starter generator.
Thanks for your help. |
Re: 94 G9A Ignition Coil Ground
Negative battery terminal.
|
Re: 94 G9A Ignition Coil Ground
There is a ground wire in the loom with a loop in it that goes on the coil screw that grounds it, I never looked at where the wire goes, black wire iirc. Its with the other wires for coil.
On right screw see the loop and black wire It will not link ebay 260602039445 |
Re: 94 G9A Ignition Coil Ground
1 Attachment(s)
This pictures may help you see how coil wiring is hooked up.
|
Re: 94 G9A Ignition Coil Ground
Thank you so much. This really helped.
|
All times are GMT -5. The time now is 08:03 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.