pedal travel
I notice that my throttle pedal moves about an inch and a half (measured at the middle of the pedal) before the solenoid clicks and it begins to move. Is this correct? It seems to get full throttle OK. Where is the adjustment for it? The ITS plunger is set for 7/32 clearance, just like the manual says. Am I worrying about nothing?
|
Re: pedal travel
No Worries, I think this is partially a function of the brake release mechanism. If the cart moved right away the motor would fight the brake until the peddle moved far enough to release it. :thumbup:
|
Re: pedal travel
Thanks, Scottie B! You da man!
|
Re: pedal travel
I just seen a lot of Ezgos :thumbup:
|
Re: pedal travel
You still da man!
|
All times are GMT -5. The time now is 10:38 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.