G16 Carburator Joint Spacer
I was ordering parts online to rebuild my carb and realized that I may not have a carburator joint spacer. Will the cart run without it? What kind of problems would it cause if I didn't have one? I am trying to figure out it this was my problem the whole time.
|
Re: G16 Carburator Joint Spacer
I would say you have to have it. :thumbup:
|
Re: G16 Carburator Joint Spacer
i also think you'll need it, carb sealing, prerformance, and heat transfer to the carb all might be why they have it?
|
Re: G16 Carburator Joint Spacer
You need it!
|
Re: G16 Carburator Joint Spacer
Can't remember if it was it the G14 or 16 but I don't think the carb will bolt to the engine block without the spacer.
Wrong bolt pattern so the spacer/insulator is needed. |
Re: G16 Carburator Joint Spacer
It would not work without the spacer, the carb couldn't even mate up with the cylinder. There are 3 carb gaskets, and they need to be there also.
|
All times are GMT -5. The time now is 11:06 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.