EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

I have a Brand New EZGO Curtis 1206AC_5360 350amp RXV Controller. This controller has been fully turned up for acceleration, speed, and torque. A RXV with 20.5” tires should get 30mph+, 23” tires and you will go even faster. These 350amp controllers were made for carts with 23” tires, backseats, and carts driven in hilly terrain. If your cart has been slowing down under load, then this is the controller you need. There is zero time on this controller.

Payment is thru PayPal as a gift or cash.

Price is $1,300.00. Wanting to trade in your old working RXV controller we can work something out on it.

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

Will this controller work on a RXV with the date code of C0309? Completely new to all this.

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

With that date code you should have a Danaher controller, so no this Curtis controller won't work for you.

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

Thank you for the follow up. Will continue to look. Appreciate reading your post throughout the site.

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

Can a pre-2012 RXV with Danaher controller be retrofitted to work with a Curtis controller?

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

Yes, it can and the best way to do it is by changing the main Danaher wiring harness to a Curtis main wiring harness. That way it's plug and play unless that Danaher cart has a bearing encoder.

We were just talking about this last week. https://www.buggiesgonewild.com/showthread.php?t=185324

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

Hey USGI, you still sell those old Danaher to Curtis conversion kits? I'd ask by PM but I don't post enough to have access to PM at this point

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

No, but it's easier if you replace the Danaher main harness with a Curtis main wiring harness.

Re: EZGO Curtis 1206AC_5360 RXV 350amp Controller
 

Yea I know, I just have a customer who is not interested in the expense. Figured if I could find the old conversion kit someone might be looking to unload it. Only pieces of that kit appear on ebay from time to time, but never the pertinent parts.

Thanks for answering