Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Harley Davidson (https://www.buggiesgonewild.com/forumdisplay.php?f=78)
-   -   Front fork bushing removal (https://www.buggiesgonewild.com/showthread.php?t=174066)

BentFrontWheel 03-11-2021 02:50 PM

Front fork bushing removal
 
1977 3 wheel golf cart having trouble removing the bushings from the fork tubes, the service manual is lacking in detail. If any one knows the proper way to remove them please let me know.

arnie-m 12-26-2021 07:46 PM

Re: Front fork bushing removal
 
I made a removal tool out of a washer that I turned down to just under the size of the I.D. of the outer tube then flattened two sides so it could slip thru the bushing. I then installed this to a long 3/8 carriage bolt with a socket on the other end to use as a hammer to withdraw the bushing it seemed to work well.
Today I ordered four bushings from a local supply company that I am hoping will work to replace the old ones also ordered some hydraulic cylinder rod wipers I hope I can use to replace the seals.
Hope this helps.


All times are GMT -5. The time now is 01:59 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.