gas 290 specs
hey guys i hope some body can help me i need the torque specs on a 290 thanks
|
Re: gas 290 specs
cant go wrong with the quality german torque specs, good and tight!
|
Re: gas 290 specs
kawpower says 13.7 lbs at 2500 rpm.
|
Re: gas 290 specs
1 Attachment(s)
Actually yes you can go wrong with too much torque in aluminum blocks as the motor heats up the head and block expand at a greater rate thean the steel bolts and the result is increased pressure on the threaded materials. If these bolts are torqued too tight to begine with then they could strip or pull ouot when expanding.....:thumbup:
The specs should be in the stickies at the top of this section also! I am sorry this is not a better copy .... |
Re: gas 290 specs
good lord scotty i was only being a smart ***, but i didnt know if he wanted bolt/nut torque or engine producing torque. you gave him nuts and bolts ,and i gave him the engine supply. man who could ask for anything more!
|
Re: gas 290 specs
You might be right... maybe he is trying to figure if it will pull the boat outta the water? :lol:
|
Re: gas 290 specs
put her is low and watch her go!
|
Re: gas 290 specs
Mr Scotty B Thank You For The Info Thank God Some Guys Here Are Still Seriours Thanks Again For The Info
|
Re: gas 290 specs
We like to have the info & the FUN :thumbup:
|
All times are GMT -5. The time now is 05:09 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.