|
2 solenoid conversion
1 Attachment(s)
Well I am working on a par car for a friend, and his ignition switch is out. I have discussed the toggle switch and solenoid method. He agreed and purchased 3 new solenoids. Now for trying to wire them. Any photos or anything will help tremendously. They are 4 post 300a continuous. See photos below. Thanks in advance. Also he bought a 2 wire ignition, and 2 wire toggle. I really need what wires go to where on solenoids, as well as toggle and ignition. I'm hoping someone has done this with the same solenoids and can send photos or a drawing Thanks again,
JermAttachment 202692https://uploads.tapatalk-cdn.com/202...aa282259ea.jpghttps://uploads.tapatalk-cdn.com/202...2877d9e0e0.jpg Sent from my SM-N960U using Tapatalk |
Re: 2 solenoid conversion
There is sticky above showing how it is done :mrgreen:
|
| All times are GMT -5. The time now is 12:44 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.