Roof strut hardware
I have a 2002 TXT that I bought without a roof. I now have a roof, and the roof supports/struts, but I do not have the bolts and/or spacers.
What thread are the front bolt holes, and what size spacers and where are they positioned (front only, or rear too?)? Thanks in advance, Louis |
Re: Roof strut hardware
I needed an answer, so I started trying different bolts I had... lo and behold the front TXT chassis nuts (where the struts bolt on) are 5/16 course thread (5/16-18 ). The spacers needed are pretty obvious after the front strut is in place.
A word of advice if you buy the 3 piece front roof support/strut from E-Z-go: you must remove all the powder coating on the shafts that go into the middle section. I literally used my dremel to take it all off. If you don't, it will be a real PITA! :? Louis |
All times are GMT -5. The time now is 08:55 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.