bleeding front brakes on 2016 P5
 

Im having issues getting pedal after bleeding brakes numerous times. i have reverse bled them, I have bled them with an air hose and nothing. I had to adjust the pedal underneath the dash by moving the turnbuckle on the master cylinder pushrod outward. Now there is absolutely nothing when you push the brake pedal. Help.

Re: bleeding front brakes on 2016 P5
 

Need to know if its a normal or one of the prototype carts that left the factory. What is the brake system? (Front disc/rear hydraulic or front disc/rear mechanical?)

Re: bleeding front brakes on 2016 P5
 

Im having the same issue with bleeding the front hydraulic brakes. The cart has the hydraulic disc front brakes and mechanical rear brakes that are connected to the parking brake and independent from the front.

Ive put a new master cylinder in and bled the brakes every way you can think of and the b rakes just wont engage properly. The pedal is really stiff but the pads will not bite to stop the car.

Help.

Re: bleeding front brakes on 2016 P5
 

On my bike it was always an issue bleeding the hydraulic clutch, a pressurized bleeder that was made out of a sprayer and a spare master cylinder cap worked well.