Buggies Gone Wild Golf Cart Forum
Page 3 of 9 < 12 3 45 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas Yamaha (https://www.buggiesgonewild.com/forumdisplay.php?f=17)
-   -   Yamaha governor bypass (https://www.buggiesgonewild.com/showthread.php?t=877)

Brian Saunby 02-19-2008 12:00 PM
Re: positrack
 
I have a 1990 G2 with a 4" lift kit I would like to install a positrack locking differantial is this posable?

shawn.m 02-19-2008 12:41 PM
Re: Yamaha governor bypass
 
no
only the redneck way locker - weld the gears up. Or a member was looking at machining a spool up

Brian Saunby 02-19-2008 12:48 PM
Re: Yamaha governor bypass
 
Thanks Shawn I had read the C9 had a pos dif but did not know if it would fit.

shawn.m 02-19-2008 12:56 PM
Re: Yamaha governor bypass
 
the only posi for Yamaha Golf Carts is the buggies unlimited for 99 up G16. no room in the g2-g9 early g16

pokie 03-13-2008 10:01 PM
Re: Yamaha governor bypass
 
I have a 2008 Yamaha Drive. The book said it was gov. to 12 mph. Can you tighten the 10 mm nut to speed it up like the older carts. 12 is too slow.
That is why I call myself Pokie

shawn.m 03-13-2008 10:33 PM
Re: Yamaha governor bypass
 
yes search on my name for pics of how to do it on a g9 same principle

Yamaha4life 03-16-2008 04:14 PM
Re: Yamaha governor bypass
 
I finnally decided to ditch it today and hook the two cable directly up. It took a couple minutes getting it just right but its noticably quicker and the top speed is alot better.


Thanks!

mikesmotortoys 03-16-2008 04:21 PM
Re: Yamaha governor bypass
 
Make sure that the throttle cable doesn't have too much slack in it. They all stretch in time and this is a BIG improvement. You'll need 1/2 inch open end for this...

mwest 03-29-2008 08:05 PM
Re: Yamaha governor bypass
 
will this work on a G16 .the pic of the cable is where my muffler is ?
and i done even know what the real year is JN6 ??

spriddle 03-29-2008 08:38 PM
Re: Yamaha governor bypass
 
Quote:
Originally Posted by mwest (Post 60390)
will this work on a G16 .the pic of the cable is where my muffler is ?
and i done even know what the real year is JN6 ??
You can hook the throttle cable directly to the carb. for a tremendous gain in top end. Just be mindful of your rpm's. G16's will scream after bypassing the governor. I suggest running a good synthetic.


All times are GMT -5. The time now is 07:33 PM.
Page 3 of 9 < 12 3 45 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.