Clutch removal tool needed?
 

I read one of the contributers yesterday and cant find it today. The blog was a way to use a certain size threaded bolt and a shaft instead of buying the 40 dollar clutch tool. Does anyone know about that or where I can find the blog? Good or bad idea?

Re: Clutch removal tool needed?
 

PM Groundpounder, Small block or Crash. They will know. Also I think there is a tool loan sticky at the top. You might also try prying GENTLY against the case with 2x4s cut to a wedge shape. Use 2 of them or 3, 1 from each side, and GENTLY pry... Did I say GENTLY?
You can break the case this way!!!!!!!!! Tho.

Re: Clutch removal tool needed?
 

Thanks again!!! Ever consider moving to Central New York? I bet you would love all the fridgid temps and snow! One of my very best high school buddies left for Tempe in the late 70's, NEVER CAME BACK!

Re: Clutch removal tool needed?
 

you can get the removal tool for like $24 from one of the site sponsors. I wont name who (to keep all things fair) but if you look you can find it. Or just PM me and i will let you know

Re: Clutch removal tool needed?
 

Hi: I can,t tell from previous posts what cart you have, but here is what I found for a G16 clutch . It may answer your question. I also had the same thoughts as you, so researched it as follows.
The bolt you will need is a 14mm dia x 1mm pitch x 2 in. long. This bolt should be at least a grade five, ( I was looking for grade eight). After extensive searching, I could not come up with this bolt "off the shelf" anywhere. A machine shop quoted me $8.85 each plus shipping, with a minimum qty. of 3 pcs.
As for the rod, it can be 7/16 dia x 5.5 inches long and could be cold rolled steel. I would have had to purchase this also but didn't get a price.
After this excercise, I elected to "bite the bullet" and buy the tool, as it was difficult to justify going through this for any savings involved. I would recommend either borrowing one or buying one to do your job. Good luck - Ray

Re: Clutch removal tool needed?
 

ok forget fairness....here is the link to the clutch puller (site sponsor so all is well) and its only $25

http://www.cartpartsplus.com/yamaha-...ch-puller.html

Re: Clutch removal tool needed?
 

:thumbup:That's a really good price!! Mine was $35.95 when I bought it a couple months ago.(also from CPP ). Go for it !!

Ray

P.S.- Be advised that you will probably get a "two" piece puller (as I did) & not one piece as shown in their picture. It worked great!!

Re: Clutch removal tool needed?
 

Chaz, I live to be outside. And I'm out side all day everyday of the year. It rains maybe 3 or 4 days a year. And I hate rain, gets every thing dirty. "I like rocks and dead things" I tell my kids! And they tell me "well, we're sure living in the right place!" Many come here and can't stand the Heat, some leave but most of them come back again, also. Theres just to much to do here!