Re: EZ GO Electric Cart Clicks but NO movement Forward or Reverse!!
Hanks so much for this post. I had the same issue and normal voltage at the solenoid but not the controller. I finally found a bad wire that went from the f/r switch to the controller. Saved the day! Thanks again
|
Re: EZ GO Electric Cart Clicks but NO movement Forward or Reverse!!
Hey I know this thread is old, but I have this same problem but my cart is a 2001 TXT (Standard) PDS 36V. Solenoid Clicks but no go. I recently had the speed sensor replaced (it was torn off or rather the wire was torn out of it going through some brush). Anyway got the cart back ran great for a few days nothing wrong and now it only clicks. I see that the other two versions (Series and DCS) have been covered. I'd love some PDS advise.
|
Re: EZ GO Electric Cart Clicks but NO movement Forward or Reverse!!
Quote:
It would be best to start a new thread to deal with a PDS issue. |
All times are GMT -5. The time now is 01:26 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.