rivet kit for ezgo
any body have a diagram or break down of the rivet kit. I have a 2005 TXT EZGO and a bag of rivets. I need to know which go where?
thanks |
Re: rivet kit for ezgo
Good luck with that. It's a royal PITA! There are a few that won't fit into a standard rivet gun. I borrowed a pneumatic riveter that worked great, much tighter than a hand-forced unit.
|
Re: rivet kit for ezgo
Quote:
|
Re: rivet kit for ezgo
Absolutely!
|
Re: rivet kit for ezgo
Quote:
|
Re: rivet kit for ezgo
Harbor Freight my friend. I bought the $40 one and have been screaming along. Forearms don't look like Popeye anymore :thumbup: As for the bigger 1/4" rivets at the bottom of the body, just use the standard ones made for the dash. They work fine. As for the others, if I remember... 7 sm black across the dash, 2 sm blk behind the nameplate, dont forget the dust cover, 2 silver lrg flange for lower part of front cowl, 4 blk lrg flange for skirts, 4 slvr lrg flange for hinges, 5 sml silver lower body at floor, 1 silver at top center front of body.
|
Re: rivet kit for ezgo
Quote:
|
Re: rivet kit for ezgo
Yat, look in the electric ezgo manuals in the stickies, it should have a breakdown for ya. I just know where they go now.
|
All times are GMT -5. The time now is 08:43 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.