Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)

- Gas Yamaha (https://www.buggiesgonewild.com/forumdisplay.php?f=17)

- - G1 torque specs (https://www.buggiesgonewild.com/showthread.php?t=81477)

Cityjoe1983

06-12-2013 04:25 PM

G1 torque specs

Does anyone know if the service manual would have torque specs for some of the bolts on the older g1's. or if there is a website with that info

lakehopper

06-12-2013 08:47 PM

Re: G1 torque specs

Specs for G1 Gas Engine:
Std. Bore 68.00mm
Piston Clearance 0.03 ~ 0.035 mm
Ring End Gap 0.2 ~ 0.4 mm
Flywheel Nut 52.6 ft. lbs.
Clutch Bolt 43 ft. lbs.
Crankcase Bolts 4.7 ft. lbs.
Head Bolts (Initial) 14.5 ft. lbs. (Final) 18 ft. lbs.

Hope this is what your looking for

Cityjoe1983

06-12-2013 10:05 PM

Re: G1 torque specs

Is there anything these guys on this site don't have answers for??

ewbldavis

06-14-2013 11:21 AM

Re: G1 torque specs

Nope...

kev2504

06-14-2013 01:11 PM

Re: G1 torque specs

Can always make something up.....:mrgreen:

All times are GMT -5. The time now is 08:41 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.