ezgo no starting no power to accessories
My 1993 ezgo 4 cycle will not start the lights will not come on. I jumped the solenoid and it turned over so would that say the solenoid is bad but the lights should still work right and how much would that cost? I got battery power, key switch working all switches working this just happened all of a sudden if theres an ez way of just jumping it for like 4 hours i got to deliver papers tommorow with it or i might have to make like 6 trips because of the sunday paper.
|
If your lights dont work I would say you have a main power wire off/loose/broken somewhere. Look for disconnected or broken wires. I doubt its the solenoid.
|
Also, check for an inline fuse for the lights.
|
If the lights dont work.....and none of the switches work.....and the pedal start doesn't work.....make you think you are NOT getting power to them. Get a test light or a voltmeter and check the start terminal on the solenoid for power while you are pushing the pedal to start. If you are not getting power to it you have lost power somewhere in the system.
|
found an inline fuse underneath a bunch of wires i checked it yesterday check the fuse's then today i found the one that blew now it works fine
|
:-D :-D :-D :-D :-D :-D :-D
Good to hear your back up and running! |
Yep....a fuse will cause you to loose power to everything. :)
|
really it will:)
|
All times are GMT -5. The time now is 09:56 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.