2010 Drag Cart
Ok. Let's get this thing started!! Taking a load or two to storage this morning .Making room in the garage to build our next drag cart. If you liked our 2009 drag cart. Well I promise this one will blow you away. We are going to start with a 2001 ez-go. I will be posting pic's as we tear down to the frame. Please fill free to ask any questions that you may have on this procedure. Dont have alot of parts yet. But I will post pic's as we go. All we have to start with is the donor cart & the motor. But check this motor out. It is a warp 9 from Netgain Motors. Voltage is 165 DC. But!!!! From time to time it has been know handle 195 volts. This motor will be going on a Mark Williams all aluminum housing, aluminum case, 35 spline aluminum spool, aluminum thirdmember, carbon fiber brakes, 4-link, ford 9'' rear end. Weight,164 Lbs assembled. Well, it ain't no Taylor & Dunn 9''. But it will work. The frame will be cut & stretch. It will have a full chrome moly rolling chassis & roll cage. The body will be dedicated to a very fine organization. The paint colors will be white, pink, & hot pink. Not alot more to add so set back and enjoy the build. And most of all please fill free to make a comet or ask questions. I will answer all but one, so don't ask it.:lhmo: ENJOY...
http://inlinethumb40.webshots.com/34...600x600Q85.jpg http://inlinethumb26.webshots.com/42...600x600Q85.jpg http://inlinethumb57.webshots.com/45...600x600Q85.jpg Oh yah. I forgot to say (Let's Race.) Also for you guys that keep up with the white zombie. He runs this same motor. |
Re: 2010 Drag Cart
what axle are you going to use GB?
that impluse will wrap a golf cart diff into a knot |
Re: 2010 Drag Cart
[QUOTE=GarageBuilt;377703]Ok. Let's get this thing started!! Taking a load or two to storage this morning .Making room in the garage to build our next drag cart. If you liked our 2009 drag cart. Well I promise this one will blow you away. We are going to start with a 2001 ez-go. I will be posting pic's as we tear down to the frame. Please fill free to ask any questions that you may have on this procedure. Dont have alot of parts yet. But I will post pic's as we go. All we have to start with is the donor cart & the motor. But check this motor out. It is a warp 9 from Netgain Motors. Voltage is 165 DC. But!!!! From time to time it has been know handle 195 volts. This motor will be going on a Mark Williams all aluminum housing, aluminum case, 35 spline aluminum spool, aluminum thirdmember, carbon fiber brakes, 4-link, ford 9'' rear end. Weight,164 Lbs assembled. Well, it ain't no Taylor & Dunn 9''. But it will work.:thumbup::thumbup::thumbup: The frame will be cut & stretch. It will have a full chrome moly rolling chassis & roll cage. The body will be dedicated to a very fine organization. The paint colors will be white, pink, & hot pink. Not alot more to add so set back and enjoy the build. And most of all please fill free to make a comet or ask questions. I will answer all but one, so don't ask it.:lhmo: ENJOY...
Hope this helps. Good morning Red 22.. Now wake up.:lhmo::lhmo::lhmo: |
Re: 2010 Drag Cart
Sorry GB i cant read..
|
Re: 2010 Drag Cart
coffee where's my coffee!
|
Re: 2010 Drag Cart
gonna need a really big wheely bar. i'm watchin:happy1::burnout:
|
Re: 2010 Drag Cart
Quote:
|
Re: 2010 Drag Cart
cool.. put some wings on that thing
|
Re: 2010 Drag Cart
Quote:
|
Re: 2010 Drag Cart
Quote:
David Wayne Hooks? |
All times are GMT -5. The time now is 11:08 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.