G29 Solenoid Upgrade - Pre-Charge Resistor
Hi Guys, I've just replaced my stock solenoid with an MZJ-400 (I already have the Navitas 440 controller).
All seems well. I have used the diode that came with the solenoid but I kept the stock pre-charge resistor. My questions is - should I have replaced the stock resistor with the new resistor? Thanks. |
Re: G29 Solenoid Upgrade - Pre-Charge Resistor
Okay, today I put in the new Admiral MOT-D2 motor and replaced all the high power cables. I took out the stock resistor as it is wired into the B+ lead and put in the resistor that came with the solenoid.
|
All times are GMT -5. The time now is 11:29 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.