2017 gas drive 2
I have a 2017 drive 2 EFI. Sometime when I stop and then push the accelerator nothing happens. I then turn the key off and back on and the cart then runs. However I may go a bit then it will do it again. Any help appreciated.
|
Re: 2017 gas drive 2
I hope that someone will post a fix. I have the same problem with my 2020 PTV. I have used several fuel blends...does not effect anything. HELP!!!!
|
Re: 2017 gas drive 2
Pedal switch.
Either disassemble it and clean it or replace it. Don't lose the ball and spring if you disassemble it. This answer is based on the statement that "nothing happens" |
Re: 2017 gas drive 2
Agree with rstacy here...If indeed "nothing happens" as in cart does not click from solenoid or turn over...pull up your floor board and check the stop switch behind pedal...
|
Re: 2017 gas drive 2
Thanks... I wil do as you suggest and report.
|
Re: 2017 gas drive 2
I lubed the rod on the bottom of the switch with WD-40. So far ...so good!
|
Re: 2017 gas drive 2
Quote:
|
Re: 2017 gas drive 2
thanks
|
Re: 2017 gas drive 2
Does anyone have any more ideas for this problem. :help:
|
Re: 2017 gas drive 2
Have you done anything other than spraying WD-40 on the outside of the pedal switch?
|
All times are GMT -5. The time now is 06:47 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.