Originally Posted by joesnuffy (Post 1848653)

I would like to share some pics of how I keep my old small carb ball joints and other carb and exhaust linkages from popping off and stay on the sockets. I use small zip ties which works very well. Sometimes I use them in a criss-cross pattern. It works very well and helps you from loosing parts accidentally if one pops off. I try different sizes to see which work the best without binding. I will post some pics.

I bet I am not the first person to do this but I am just sharing what I do on My G1 in a few threads here on the G1s for Newbies. I like to keep things as stock as I can on my 1982 G1.

I also found some of the plastic ball joints on Amazon for a EZGO that are suppose to work but they are 30 dollars for 10 each. I am going to purchase some later this year and see if they actually work but I was wondering if anyone else here had tried them. Here is the link.

https://www.amazon.com/dp/B00TXUWLLE...v_ov_lig_dp_it

Thanks and I hope this post helps someone and I appreciate all those who post things here that have helped me over the past 15 years.


Joe

Originally Posted by Newt69 (Post 1951040)

Just picked up a 1986 G. I would like to replace the front seats. I've been looking but can't find a source for them. Does anyone know of a source or even another seat that will fit nicely in the G1?