trouble getting clutch bolt out
I have a G1 and was trying to put crank seals in it and the first side I statred on , which is the clutch side, the bolt that goes through to the crank moved about 2 turns and will not move either way now,I may have turned it the wrong direction but I have no manual and turned as being right handed. Really in a mess Thanks for any help
Steve |
Re: trouble getting clutch bolt out
I always use an impact.
|
Re: trouble getting clutch bolt out
Should be a right hand thread.
|
Re: trouble getting clutch bolt out
I am new at this too- took my engine apart yesterday- had the same problem. Bolt comes out counter-clockwise, had to use an impact - try going forward and back a few times, thats what got mine to come out. Good luck.
|
Re: trouble getting clutch bolt out
When you put it back together remember, never sieze is your best pal. Good luck.
|
All times are GMT -5. The time now is 11:24 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.