Cable lengths for batteries, motor, etc
Does anyone have a spec sheet for battery cable lengths, and all the other cable lengths for for an Ezgo Txt? I'm replacing all my cables to the motor, controller, fr switch, solenoid and batteries. It seems someone replaced all of them before and they are all different lengths. Thanks.
|
Re: Cable lengths for batteries, motor, etc
You making them yourself or ordering them from somewhere? If you are making them it may make sense to take off the cable you are replacing and get the length you need by holding the new cable in place to allow for how you are routing things.
If you are ordering them I would think that most places would have the lengths unless you were going with a non-cart provider. To be honest, cables are pretty easy to make and doing it yourself will save you some dough. |
Re: Cable lengths for batteries, motor, etc
Yes^^^^^ I find it funny that some sites charge so much more than others.
|
Re: Cable lengths for batteries, motor, etc
I am making them myself. BUT the previous owner had replaced some and the lengths are all over the place, a few are a lot longer than they need to be. Like I have 2-6" cable for the batteries themselves and2-10" (too long). They can all be 6". The same goes with the cables to my motor, fr switch, controller etc. trust me I can prob shave 2 feet or more off the overall length of the cables on my cart. I pulled them off yesterday and measured them. I was only asking if anyone had the specs for lengths to compare then to what I have. And yes cheaper to do myself, I have $70 into all the 2 gauge cable and the lugs.
|
Re: Cable lengths for batteries, motor, etc
1 Attachment(s)
So I found a website with the lengths they sell in a kit. This is why I was inquiring. The total overall length of my cables when I measure them is 309". Is you add up the total length of the kit it is 229". That is telling me I have 6 1/2 feet more cable on my cart than I actually need.
|
Re: Cable lengths for batteries, motor, etc
Quote:
Are you going to silver solder the terminals? Based on some Imput on this forum, I plan to. I have all the tools from AC work. If not for that, I think buying ready made would probably be wise decision. Just one bundle of silver solder is $100. In fact, if not for my cart having two batteries in the well, I would have bought a ready made kit. |
Re: Cable lengths for batteries, motor, etc
Quote:
|
Re: Cable lengths for batteries, motor, etc
Quote:
|
All times are GMT -5. The time now is 01:01 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.