Buggies Gone Wild Golf Cart Forum
Page 3 of 3 < 12 3
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   Heavy Duty F/R Switch Cam Install (https://www.buggiesgonewild.com/showthread.php?t=39013)

scottyb 01-24-2011 05:58 PM
Re: Heavy Duty F/R Switch Cam Install
 
It has been awhile and this thread needs an update.

We did have stop issues on the first cams we used... That was sorted out. The cam stop is now long enough to work with the factory stops. The Buss bars have also gone through some changes. The new alloys and design runs cooler than ever.. The directions are now Printed and Pictured for those of us who hate to read, & who doesn't?
So I'll stop typing now :lol:

scottyb 01-24-2011 06:03 PM
Re: Heavy Duty F/R Switch Cam Install
 
It has been awhile and this thread needs an update.

We did have stop issues on the first cams we used... That was sorted out. The cam stop is now long enough to work with the factory stops. The Buss bars have also gone through some changes. The new alloys and design runs cooler than ever.. The directions are now Printed and Pictured for those of us who hate to read, & who doesn't?
So I'll stop typing now :lol:


All times are GMT -5. The time now is 11:23 PM.
Page 3 of 3 < 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.