LiFePo4 in 48v truck
1 Attachment(s)
This is pretty much a drop-in swap.
2p16s >60ah cells from Ebay. 120ah 6kwh bottom balance-no bms needed Charge to 55v with DQ charger. |
Re: LiFePo4 in 48v truck
Sweet :thumbup:
|
Re: LiFePo4 in 48v truck
What would you estimate the weight to be of those batteries?
|
Re: LiFePo4 in 48v truck
Lithium batteries don't "require" a BMS. However it's my understanding that if you don't have a BMS, you must or should manually test the cells and manually top balance them.
Remember.....the charger is just "dumb power" and it charges for pack voltage. If you charge the pack to 55-V, that doesn't mean that one cell would be at 58-V and one or two others be at 52-V. The problem occurs when that one cell gets beyond it's charge limitation.....then you could have some very real problems. Again, just my non-expert understanding. |
All times are GMT -5. The time now is 03:24 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.