|
Body
can anybody tell me if a plastic body for a txt will fit my 1996 medalist? the body i have now is metal
|
Re: Body
Anything is possible with a little modifications. I dont think it will bolt right up but I could be wrong.
|
Re: Body
someone told me that the only differance was that one was metal and the other plastic, I have one of each
|
Re: Body
3 Attachment(s)
I found it easy to swap from the metalist to the plastic body on mine, hardest part is drilling out the rivets, everything just swapped right over, couple little things, like the brackets where the seat attaches had to be changed, and on the front cowel there was a bracket i didn't use
|
Re: Body
Im lovin those side steps you got :thumbup:
|
Re: Body
I like the side steps too did you buy or make them on and btw your shop is waaaaaaaaaaaaaaaaaaaaaay to clean
|
Re: Body
thanks guys the running boards where bought thru a site sponsor, but I modifide them in front to have a mud guard/shield effect by adding a piece of diamond plate, and as far as the shop to clean, that depends what project is going on, gets cleaned up after each project is finished.
|
Re: Body
they are pretty slick where did they come from
|
Re: Body
Sorry Cummins didn't intent to hijack your thread, was just trying to help, for more imfo on the change search " project Metalist to TXT "
|
Re: Body
1 Attachment(s)
yup. this is a medalist with a txt front . direct swap. i have read that there is no real weight savings tho.
nice cart wolf. love the color. |
| All times are GMT -5. The time now is 09:50 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.