|
Home made windshield
5 Attachment(s)
Here is a few pics of the windshield I made for my 1995 gas club car. Also a few pics of the radio .
|
Re: Home made windshield
what kind of material is that?
|
Re: Home made windshield
1 Attachment(s)
1/4 inch Acrylic . The black trim is from the door jams of a old car . Here is the radio pics
|
Re: Home made windshield
Very nice work...:thumbup:
|
Re: Home made windshield
Lookin good!:thumbup:
|
Re: Home made windshield
Good job! :thumbup: What did you save vs. a new one or did you already have the material?
|
Re: Home made windshield
Thanks I got the acrylic and the trim for free . I had to buy the hinge for $11 then $10 for the nuts and bolts . So it only cost me $21 . I also used 1/4 inch aluminum corner bracket behind the hinge to give it more support and made the clips to hold it on with 1 inch wide Aluminum works great
|
Re: Home made windshield
If you go to your local sign shop they would probably just give you the acrylic for free from there scrap pile . as for the trim just find a old car and take the waterproof seals from inside the doors
|
Re: Home made windshield
The radio trim around the diamond plate I got from a old boat
|
Re: Home made windshield
nice work.thanks for the pics.
|
| All times are GMT -5. The time now is 08:56 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.