governor bypass
Repowering a 1988 club car with a gx390 , unsure on the governors i know there is one in the engine, was going to leave alone. the one on the rearend do i hook this up or bypass it. thanks.
|
Re: governor bypass
Just bypass the one in the rear. Mine is an ezgo and I just took the arm off and let the shaft there.
|
Re: governor bypass
thats what i was thinkin didint know if the arm had to be ziptied in a certain position thanks
|
Re: governor bypass
I think most just use a spring. If you think about it, the mechanicals inside the differential are still working and moving the arm, it's just not connected to the throttle cable anymore. May not matter, but with a spring you won't bind anything in the diff, or break the tie.....
|
All times are GMT -5. The time now is 07:24 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.