Converting PDS to Fleet
Got a 02 PDS that I'm coverting over to a Fleet. I need more torque and I just can't get it from the PDS....at least not in my budget. I've got a GE Beast and a 500amp Alltrax AXE going in it. I'm pretty good with most of the wiring but am having trouble figuring out the ITS wires. Can I take the wiring harness off my old PDS controller and cut it and wire it up to fit the 1 2 3 4 post on the AXE controller? Or do I need to just re-wire it fromt he switch forward? Looking at the PDS diagram and the fleet diagram it looks like the black and white wires are the same (backwards though) but there may be a difference in the green, blue, red and oragne wires between the two. Anybody ever made this switch? Any help would be appreciated.
Thanks! GFF |
Re: Converting PDS to Fleet
Welcome To BGW !!!!
I Heard there is a wiring adapter out there for that. From Alltrax...? THere are a couple of guys on here that probably know how that is done......you will just have to wait a bit... |
Re: Converting PDS to Fleet
Welcome to the forum grassflatsfisher.................
|
Re: Converting PDS to Fleet
I haven't tried calling Alltrax yet but thought I'd hit you guys up one more time to see if anyone could help.
Thanks!!! |
All times are GMT -5. The time now is 01:39 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.